GUTTER

The shape of the gutters has been specially designed to ensure high efficiency in water drainage. They have great depth and an appropriate profile to effectively collect water from the roof surface even during intense rainfall without the risk of overflow. We produce gutters in standard lengths of 4 and 3 m. Gutters are packed in sets of 5 in dedicated sleeves protecting against dirt.

DOWNPIPE

The downpipes of gutter systems have a cross-section of 87 mm and 100 mm. Standard pipe lengths are 3 m and 1 m. They are attached to the facade using dedicated clamps that provide the appropriate distance from the building wall. Specially socketed ends allow for quick installation of pipes on tall buildings without the need for additional couplings.

GUTTER CONNECTOR

Individual gutter sections or a gutter with a corner are connected using a dedicated connector. The gutter systems are equipped with a two-clamp connector (wide) ensuring strong and durable connection with quick and simple installation. It is the only gutter connector available on the market made of 0.8 mm sheet metal with a sliding seal. The connector is standard equipped with a stabilizer that additionally stiffens the connection.

EXTERNAL/INTERNAL CORNER

Corners ensure aesthetic and functional connection of gutters in building corners. Our offer includes an external and internal corner with a standard angle of 90°, as well as versions with an angle of 135°.

GUTTER OUTLET

The outlet collects water from the gutters and directs it to the downpipe. The construction and proper installation of this element greatly affects the functionality of the entire drainage system. The gutter outlet is very well matched with other elements, ensuring a tight and solid installation. Available versions: 125/87, 125/100, 150/100.

GUTTER END CAP

An element used to close the gutter at its ends. The offered end cap has a large depth and fits on both sides of the gutter.

FASCIA BRACKET 125/150

The fascia bracket is a gutter mounting element installed on the fascia board of the eaves.

ELBOW 63° 87/100

Allows for adapting system elements to different roof and facade shapes. The offered product is profiled at a 63° angle.

RAFTER HOOK 125/150

The rafter hook is mounted directly to the roof rafters. Available in two dimensions: 125 mm made of 4 mm thick, 25 mm wide tape, and 150 mm made of 5 mm thick, 27 mm wide tape.

SPOUT 87/100

The output element of the gutter system is the spout, which drains water from the downpipe. The offered product has a 63° angle and a cross-section of 87 or 100 mm.

COUPLING

Downpipes are connected using a coupling. The careful execution of this element ensures that there is no risk of leakage at the connection point.

INSPECTION HATCH 87/100

This element stops and allows for the removal of contaminants falling into the downpipe along with water, such as leaves, feathers, small branches. This helps maintain the system’s patency, and as a result, its full functionality.

SCREW CLAMP 87/100

In our offer, you will find clamps equipped with special mounting holes adapted to a dedicated double-threaded connector with long sleeves.

T-PIECE 63° 87/100

If it is necessary to drain water from two downpipes to one spout, a specially adapted T-piece can be used. The T-piece is available in sizes 87 mm and 100 mm.

OUTLET BASKET

Effectively stops leaves, branches, and other contaminants that can block the free flow of water to the downpipes – very easy to install.

FLEXIBLE ELBOW FOR SEDIMENT TRAP

Used to connect the sediment trap with a 110 sewage pipe.

UNIVERSAL “BUT” SEDIMENT TRAP

Horizontal inspection hatch for catching impurities from the roof, additionally has an anti-storm flap. The BUT gutter sediment trap is available in 4 colors.

CLAMP HOLDER FOR SANDWICH PANEL

Used for mounting downpipe clamps on sandwich panels, fastened in 4 places. Colors matched to the offer.