We integrate tempered glass with steel – a highly durable, low-maintenance material – so the product’s resistance to perforation is very high.

The SOLROOF roof is based on a steel roofing system. The SOLROOF installation method ensures proper watertightness at sheet joints, making the roof fully functional and watertight, and fulfilling its primary purpose – protecting the home.

We provide installer training; panels are installed using a technology familiar to roofers – the snap-lock standing seam (“click”). The roof can also be purchased with installation. We also provide additional materials such as step-by-step instructions, support with technical advice, and a team of authorized roofers.

SOLROOF is a complete solution. The entire roof – active (photovoltaic) part, inactive part, flashings and roofing accessories, as well as the gutter system – is manufactured by us. This means the solutions are dedicated and perfectly matched, and are readily available if the system needs replacement parts or expansion.

The SOLROOF brand is backed by BP2 Sp. z o.o. – we have been a renowned manufacturer of steel roofing systems for 30 years. In our facilities within the European Union, we produce the complete SOLROOF steel roof.

The roof can be available in as little as 24 hours, which shortens lead times, reduces costs, and supports servicing. We have an extensive sales network, and contact with our sales department is handled through representatives directly affiliated with our company. This gives the customer security and convenience when purchasing and handling warranty, complaint, or service matters.

The SOLROOF roof is made from low-emission XCarb® Recycled and Renewably Produced from ArcelorMittal steel , with at least 75% recycled content, produced in furnaces powered 100% by renewable sources, and easily recyclable again – while also being the most durable raw material.

We are the only system on the market with a BROOF-T4 certificate confirming its safety. Independent tests have shown that SOLROOF roofing elements are resistant to fire and melting, preventing the spread of fire across the panel surface.

As the only solution on the market, it is equipped with original MC4 EVO2 connectors from a renowned manufacturer.

Optimizers from the renowned company SolarEdge increase panel performance, allowing you to enjoy high and cost-effective electricity yields, regardless of shading or soiling, which in traditional photovoltaic panels reduces the efficiency of the entire installation.

The SOLROOF steel roof is cheaper and lighter thanks to the use of 0.5 mm steel. Thanks to special coatings, it does not require complex and costly maintenance work. Roof installation is cheaper and much faster.

Active and inactive panels are lighter than alternative solutions because we use 0.5 mm steel. The SOLROOF roof does not require reinforced roof structures.

We limited the number of connections and reduced cable length. Panels are installed using a familiar technology – the snap-lock standing seam (“click”) – and all wiring is hidden under the roof slope in dedicated channels.

The SOLROOF roof is made from low-emission XCarb® Recycled and Renewably Produced from ArcelorMittal steel , with at least 75% recycled content, produced in furnaces powered 100% by renewable sources, and easily recyclable again – while also being the most durable raw material.

We are the only system on the market with a BROOF-T4 certificate confirming its safety. Independent tests have shown that SOLROOF roofing elements are resistant to fire and melting, preventing the spread of fire across the panel surface.

We integrate tempered glass with steel – a highly durable, low-maintenance material – so the product’s resistance to perforation is very high.

The SOLROOF roof is based on a steel roofing system. The SOLROOF installation method ensures proper watertightness at sheet joints, making the roof fully functional and watertight, and fulfilling its primary purpose – protecting the home.

As the only solution on the market, it is equipped with original MC4 EVO2 connectors from a renowned manufacturer.

Optimizers from the renowned company SolarEdge increase panel performance, allowing you to enjoy high and cost-effective electricity yields, regardless of shading or soiling, which in traditional photovoltaic panels reduces the efficiency of the entire installation.

As the manufacturer of a complete system, we offer competitive, lower prices for the roof, flashings, and peripheral devices. Installation of the roofing is cheaper thanks to its simplicity and the use of technologies familiar to roofers.

We provide installation training; panels are installed using a technology familiar to roofers – the snap-lock standing seam (“click”). The roof can also be purchased with installation. We also provide additional materials such as step-by-step instructions and technical advisory support.

SOLROOF is a complete solution. The entire roof – active (photovoltaic) part, inactive part, flashings and roofing accessories, as well as the gutter system – is manufactured by us. This means the solutions are dedicated and perfectly matched, and are readily available if the system needs replacement parts or expansion.

The roof can be available in as little as 24 hours, which shortens lead times, reduces costs, and supports servicing. We have an extensive sales network, and contact with our sales department is handled through representatives directly affiliated with our company. This gives the customer security and convenience when purchasing and handling warranty, complaint, or service matters.

The SOLROOF roof is made from low-emission XCarb® Recycled and Renewably Produced from ArcelorMittal steel , with at least 75% recycled content, produced in furnaces powered 100% by renewable sources, and easily recyclable again – while also being the most durable raw material.

Service is accessible and straightforward to perform; we provide detailed roof installation and removal instructions. The SOLROOF roof does not require full removal of the roof covering, and components such as optimizers and cabling are easily accessible, enabling safe servicing by certified installation teams.

We are the only system on the market with a BROOF-T4 certificate confirming its safety. Independent tests have shown that SOLROOF roofing elements are resistant to fire and melting, preventing the spread of fire across the panel surface.

As the only solution on the market, it is equipped with original MC4 EVO2 connectors from a renowned manufacturer.

Optimizers from the renowned company SolarEdge increase panel performance, allowing you to enjoy high and cost-effective electricity yields, regardless of shading or soiling, which in traditional photovoltaic panels reduces the efficiency of the entire installation.

The minimalist look lets the building’s form stand out better, without the fear of overwhelming it with bulky, unattractive panels. The SOLROOF roof does not look different from standard roofing because it is based on traditional steel roofing panels installed with a standing seam. This makes SOLROOF a good fit for both modern and traditional architecture, and it can be considered by heritage conservation authorities.

Integrated panels in the SOLROOF system are lighter than a traditional roof covering with mounted photovoltaic panels. Thanks to this, the solution does not require reinforcing the roof structure, helping avoid additional static and aerodynamic loads while ensuring higher efficiency and aesthetics. The SOLROOF roof can cover not only residential buildings, but also, for example, garages and carports.

Panels are installed using a technology familiar to roofers – the snap-lock standing seam (“click”), which makes installation very easy and fast. SOLROOF is a complete solution. The entire roof – active (photovoltaic) part, inactive part, flashings and roofing accessories, as well as the gutter system – is manufactured by us. This means SOLROOF components are dedicated and perfectly matched, and are readily available if the system needs replacement parts or expansion. The 2-in-1 roof is installed by roofers, so the installation runs smoothly and is coordinated by one contractor.

Steel is one of the most durable raw materials; thanks to its strength and protective coatings, it enables long-term warranties and is much more durable than standard photovoltaic panels without a steel base. The SOLROOF roof is made from low-emission XCarb® Recycled and Renewably Produced from ArcelorMittal steel , with at least 75% recycled content, produced in furnaces powered 100% by renewable sources, and easily recyclable again.

We are the only system on the market with a BROOF-T4 certificate confirming the safety of our 2-in-1 roof. Independent tests have shown that SOLROOF roofing elements are resistant to fire and melting, preventing flames from penetrating from the roof into the building; we achieved this thanks to the use of a steel base and special tempered glass.

One system, one installation, and one warranty, which means fewer issues determining which subcontractors are responsible for service or warranty work. • Module – 12 years • Optimizer – 25 years • Inverter – 12 years • 1 year – in case the PV module’s output power drops below 97.5% • 25 years – in case the PV module’s output power drops below 80% • 30 years – for the steel part

In emergency situations, service is carried out by our authorized roofers. There is no need to individually determine which contractors are responsible for installation errors at each stage, because SOLROOF is responsible for the entire installation process. In the SOLROOF system, SolarEdge optimizers are located under the VOLT verge flashings (running along the roof’s side edges) and under the inactive – easy to remove – FIT steel roofing panels. This enables safe and hassle-free replacement of panels, minimizing the risk of damaging neighboring elements and eliminating the need to remove the entire roof slope when replacing a single element or performing other service work.

The SOLROOF system eliminates these problems by using fully certified, original MC4 connectors manufactured by a renowned producer. All key components – such as panels, inverter, optimizers, and cables – are fitted with these high-quality connectors to ensure reliability and full electrical compatibility. Professional workmanship of every element guarantees the highest connection quality, translating into trouble-free operation and higher system efficiency. As a result, the risk of damage to the inverter and optimizers is minimized, and the installation is fully safe to use. In addition, the SOLROOF system makes diagnostics and maintenance easier, ensuring durability and performance for many years.

Optimizers from the renowned company SolarEdge increase panel performance, allowing you to enjoy high and cost-effective electricity yields, regardless of shading or soiling, which in traditional photovoltaic panels reduces the efficiency of the entire installation.

SOLROOF is a complete solution. The entire roof – active (photovoltaic) part, inactive part, flashings and roofing accessories, as well as the gutter system – is manufactured by us. This means SOLROOF roof components are perfectly matched and readily available if the system needs replacement parts or expansion.

The SOLROOF brand is backed by BP2 Sp. z o.o. – we have been a renowned manufacturer of steel roofing systems for 30 years. In our facilities within the European Union, we produce FIT VOLT panels on machines and using technologies developed by us.